Frequently Asked Questions


How Long Does It Take To Charge?

Charging time is between 60-70 minutes to full charge.

Can You Fine Tune The Balance?

You can offset the balance by pressing the Fine-tune buttons to correct the orientation.

Does It Have Altitude Hold?

Atmospheric pressure one key set high, you can accurately lock the height and location, stable hover, from any angle shooting are convenient.

Does It Have FPV (First Person View) Capability?

Wifi real-time transmission FPV system which can Connect your phone with the drone and the view will be shown directly on your phone, thus enjoy the world above the horizon,capture photos and record videos for your great memory.

My drone is not staying on course or is out of control.

Check to ensure that there are no strong winds that may be impacting the course of the drone. Try bringing the drone at least 30cm from the ground to reduce the“ground effect”. Follow the instructions for Fine-Tuning Function to further stabilize the drone flight. Ensure that you are keeping the remote control within 100 meters of the drone at all times during flight.

My drone is failing to ascend

If your drone is failing to ascend, please check the battery levels of your controller and drone and ensure that they are fully charged. Make sure that the rotation of the blades is fast enough to cause the drone to ascend.

My drone is landing too fast

If your drone is landing too fast, try manually pulling down the throttle stick slowly so that your drone loses altitude at a slower pace.

My WiFi connection to the drone keeps dropping

If your phone is disconnecting from the drone’s WiFi signal, you may need to adjust one of two settings on your phone.1) When connecting to the drone’s WiFi your phone may ask if you want to stay connected to this WiFi signal even though it does not have an internet connection.Check the box next to this setting.2) Some phones allow for prioritizing specific WiFi Network connections.Making your drone’s WiFi Network the highest priority may help with your connection stability without impacting your normal usage

My controller is failing to connect

Check to ensure that both the controller and the drone are turned on and have battery life. If they are still failing to connect, please reset both units and follow the directions to connect the transmitter and receiver again.

How do you initiate a backflip?

Press the 360 button on the top right of the controller and you will hear a beep. Push the right joystick forward for a front flip, back for a back flip, right for a right flip and left for a left flip.